59
ASRock Z77 Extreme9 Motherboard
English
4. Click the
Create Team
tab.
* The
Create Team
tab appears only if there are teamable adapters available.
5. Click the
Team Name
fi
eld to enter a team name.
6. Click the
Team Type
fi
eld to select a team type.
7. Assign any available adapter or adapters to the team by selecting the adapter
from the
Load Balance Members
list. There must be at least one adapter
selected in the
Load Balance Members
list.
8. You can assign any other available adapter to be a standby member by selecting
it from the
Standby Member
list.
* There must be at least one Broadcom network adapter assigned to the team.
The Large Send Of
fl
oad (LSO), Checksum Of
fl
oad (CO), and RSS indicate if
the LSO, CO, and/or RSS properties are supported for the team. The LSO, CO,
and RSS properties are enabled for a team only when all of the members
support and are con
fi
gured for the feature.
* Adding a network adapter to a team where its driver is disabled may negatively
affect the of
fl
oading capabilities of the team. This may have an impact on the
team’s performance. Therefore, it is recommended that only driver-enabled
network adapters be added as members to a team.
