56
English
RFR Delay (CH B)
Configure RFR Delay for Channel B.
Advanced Setting
ODT WR (CH A)
Configure the memory on die termination resistors' WR for channel A.
ODT WR (CH B)
Configure the memory on die termination resistors' WR for channel B.
ODT PARK (CH A)
Configure the memory on die termination resistors' PARK for channel A.
ODT PARK (CH B)
Configure the memory on die termination resistors' PARK for channel B.
ODT NOM (CH A)
Use this to change ODT (CH A) Auto/Manual settings. The default is [Auto].
ODT NOM (CH B)
Use this to change ODT (CH B) Auto/Manual settings. The default is [Auto].
Dll Bandwidth 0
Configure Dll Bandwidth 0 (1067 MHz) to maximize the performance of
intergrated memory controller.
Dll Bandwidth 1
Configure Dll Bandwidth 1 (1333 MHz) to maximize the performance of intergrated
memory controller.
Dll Bandwidth 2
Configure Dll Bandwidth 2 (1600 MHz) to maximize the performance of
intergrated memory controller.
Dll Bandwidth 3
Configure Dll Bandwidth 3 (1867 MHz) to maximize the performance of intergrated
memory controller.
Command Tristate
Enable or disable Command Tristate support.
