ASROCK X570 Steel Legend Page 76 User Manual Download

Page: 76 / 95

English

4.4.2 Onboard Devices Configuration

SR-IOV Support

Enable/disable the SR-IOV (Single Root IO Virtualization Support) if the system
has SR-IOV capable PCIe devices.

UMA Frame buffer Size

(Only for processor with integrated graphics)

This item allows you to set the size of the UMA frame buffer.

Onboard HD Audio

Enable/disable onboard HD audio. Set to Auto to enable onboard HD audio and
automatically disable it when a sound card is installed.

Front Panel

Enable/disable front panel HD audio.

Deep Sleep

Configure deep sleep mode for power saving when the computer is shut down.

Restore on AC/Power Loss

Select the power state after a power failure. If [Power Off] is selected, the power will
remain off when the power recovers. If [Power On] is selected, the system will start
to boot up when the power recovers.

Summary of Contents for X570 Steel Legend
































































































Search results

Summary of Contents for X570 Steel Legend

Reviews:

Related manuals for X570 Steel Legend

Brands by name

Popular brands

ASROCK X570 Steel Legend, User Manual

Search results

Summary of Contents for X570 Steel Legend

Reviews:

Related manuals for X570 Steel Legend

Brands by name

Popular brands