ASROCK X570 Steel Legend User Manual Download Page 45

Page: 45 / 95

English

X570 Steel Legend

Step 1

Power on your computer and boot into OS.

Step 2

Remove the AMD drivers if you have any VGA drivers installed in your system.

Step 3

Install the required drivers and CATALYST Control Center then restart your
computer. Please check AMD’s website for details.

2.8.2 Driver Installation and Setup

Step 4

Double-click the

AMD Catalyst Control

Center

icon in the Windows

system tray.

Step 5

In the left pane, click

Performance

and

then

AMD CrossFireX

. Then select

Enable AMD CrossFireX

and click

Apply

Select the GPU number according to your
graphics card and click

Apply

AMD Catalyst Control Center

The Catalyst Uninstaller is an optional download. We recommend using this utility to un-
install any previously installed Catalyst drivers prior to installation. Please check AMD’s
website for AMD driver updates.

Summary of Contents for X570 Steel Legend
































































































Search results

Summary of Contents for X570 Steel Legend

Reviews:

ASROCK X570 Steel Legend, User Manual, Page: 45 / 95

Search results

Summary of Contents for X570 Steel Legend

Reviews: