manualshive.com logo in svg

ASROCK X570 Steel Legend, User Manual, Page: 19 / 95

Share
Download
ASROCK X570 Steel Legend User Manual Download Page 19

English

13

X570 Steel Legend

This is an ATX form factor motherboard. Before you install the motherboard, study 
the configuration of your chassis to ensure that the motherboard fits into it.

Pre-installation Precautions

Take note of the following precautions before you install motherboard components 
or change any motherboard settings.

• 

Make sure to unplug the power cord before installing or removing the motherboard. 
Failure to do so may cause physical injuries to you and damages to motherboard 
components.

• 

In order to avoid damage from static electricity to the motherboard’s components, 
NEVER place your motherboard directly on a carpet. Also remember to use a grounded 
wrist strap or touch a safety grounded object before you handle the components.

• 

Hold components by the edges and do not touch the ICs.

• 

Whenever you uninstall any components, place them on a grounded anti-static pad or 
in the bag that comes with the components.

• 

When placing screws to secure the motherboard to the chassis, please do not over-
tighten the screws! Doing so may damage the motherboard.

Chapter  2  Installation

Summary of Contents for X570 Steel Legend
































































































Reviews:

No comments