ASROCK SP55 PRO -, Installation Manual

Page: 31 / 221

3 1 3 1 3 1 3 1 3 1
ASRock P55 Pro Motherboard
2.13.2 Installing Windows 2.13.2 Installing Windows
2.13.2 Installing Windows 2.13.2 Installing Windows
2.13.2 Installing Windows
® ®
® ®
®
Vista Vista
Vista Vista
Vista
TM TM
TM TM
TM
/ Vista / Vista
/ Vista / Vista
/ Vista
TM TM
TM TM
TM
64-bit 64-bit
64-bit 64-bit
64-bit
Without RAID Functions Without RAID Functions Without RAID Functions Without RAID Functions Without RAID Functions
If you want to install Windows
®
Vista
TM
/ Vista
TM
64-bit OS on your SATA / SATAII
HDDs without RAID functions, please follow below steps.
Using SATA / SATAII HDDs without NCQ function
STEP 1: Set up BIOS.
A. Enter BIOS SETUP UTILITY Advanced screen Storage Configuration.
B. Set the option “SATAII Operation Mode” to [IDE].
STEP 2: Install Windows ® Vista TM / Vista TM 64-bit OS on your system.
Using SATA / SATAII HDDs with NCQ function
STEP 1: Set Up BIOS.
A. Enter BIOS SETUP UTILITY Advanced screen Storage Configuration.
B. Set the option “SATAII Operation Mode” to [AHCI].
STEP 2: Install Windows ® Vista TM / Vista TM 64-bit OS on your system.
Insert the Windows ® Vista TM / Vista TM 64-bit optical disk into the optical drive to boot
your system, and follow the instruction to install Windows ® Vista TM / Vista TM 64-bit OS
on your system. When you see “Where do you want to install Windows?” page, please
insert the ASRock Support CD into your optical drive, and click the “Load Driver” button
on the left on the bottom to load the Intel
®
AHCI drivers. Intel
®
AHCI drivers are in the
following path in our Support CD:
.. \ I386 (For Windows
®
Vista
TM
OS)
.. \ AMD64 (For Windows ® Vista TM 64-bit OS)
After that, please insert Windows ® Vista TM / Vista TM 64-bit optical disk into the optical
drive again to continue the installation.
EnglishEnglishEnglishEnglishEnglish
2.14 2.14 2.14 2.14 2.14 Untied Overclocking T Untied Overclocking T Untied Overclocking T Untied Overclocking T Untied Overclocking Technology echnology echnology echnology echnology
This motherboard supports Untied Overclocking Technology, which means during
overclocking, FSB enjoys better margin due to fixed PCI / PCIE buses. Before you
enable Untied Overclocking function, please enter “Overclock Mode” option of BIOS setup
to set the selection from [Auto] to [Manual]. Therefore, CPU FSB is untied during
overclocking, but PCI / PCIE buses are in the fixed mode so that FSB can operate under
a more stable overclocking environment.
Please refer to the warning on page 7 for the possible overclocking risk
before you apply Untied Overclocking Technology.