ASROCK ROMED4ID-2T Page 68 User Manual Download

Page: 68 / 76

English

SLIMLINE2-1 Slot OpROM

Use this item to select slot storage and Network Option ROM policy. In Auto option, the

default is Disabled with NVMe device, but it is Legacy with other devices. (This item can't

select Video Option ROM policy.)

SLIMLINE2-2 Slot OpROM

Use this item to select slot storage and Network Option ROM policy. In Auto option, the

default is Disabled with NVMe device, but it is Legacy with other devices. (This item can't

select Video Option ROM policy.)

SLIMLINE3-1 Slot OpROM

Use this item to select slot storage and Network Option ROM policy. In Auto option, the

default is Disabled with NVMe device, but it is Legacy with other devices. (This item can't

select Video Option ROM policy.)

SLIMLINE3-2 Slot OpROM

Use this item to select slot storage and Network Option ROM policy. In Auto option, the

default is Disabled with NVMe device, but it is Legacy with other devices. (This item can't

select Video Option ROM policy.)

SLIMLINE4-1 Slot OpROM

Use this item to select slot storage and Network Option ROM policy. In Auto option, the

default is Disabled with NVMe device, but it is Legacy with other devices. (This item can't

select Video Option ROM policy.)

SLIMLINE4-2 Slot OpROM

Use this item to select slot storage and Network Option ROM policy. In Auto option, the

default is Disabled with NVMe device, but it is Legacy with other devices. (This item can't

select Video Option ROM policy.)

SLIMLINE5-1 Slot OpROM

Use this item to select slot storage and Network Option ROM policy. In Auto option, the

default is Disabled with NVMe device, but it is Legacy with other devices. (This item can't

select Video Option ROM policy.)

SLIMLINE5-2 Slot OpROM

Use this item to select slot storage and Network Option ROM policy. In Auto option, the

default is Disabled with NVMe device, but it is Legacy with other devices. (This item can't

select Video Option ROM policy.)

Summary of Contents for ROMED4ID-2T












































































Search results

Summary of Contents for ROMED4ID-2T

Reviews:

Related manuals for ROMED4ID-2T

Brands by name

Popular brands

ASROCK ROMED4ID-2T, User Manual

Search results

Summary of Contents for ROMED4ID-2T

Reviews:

Related manuals for ROMED4ID-2T

Brands by name

Popular brands