ASROCK ROME2D32GM-2T User Manual Download Page 72

Page: 72 / 99

English

3.3.14 Network Stack Configuration

Network Stack

Use this item to enable or disable UEFI Network Stack.

Ipv4 PXE Support

Use this item to enable or disable IPv4 PXE boot support. If disabled, IPv4 PXE boot
support will not be available.

Ipv4 HTTP Support

Use this item to enable or disable IPv4 HTTP boot support. If disabled, IPv4 HTTP boot
support will not be available.

Ipv6 PXE Support

Use this item to enable or disable IPv6 PXE boot support. If disabled, IPv6 PXE boot
support will not be available.

Ipv6 HTTP Support

Use this item to enable or disable IPv6 HTTP boot support. If disabled, IPv6 HTTP boot
support will not be available.

IPSEC Certificate

Support to Enable/Disable IPSEC certificate for Ikev.

Summary of Contents for ROME2D32GM-2T



































































































Search results

Summary of Contents for ROME2D32GM-2T

Reviews:

Related manuals for ROME2D32GM-2T

Brands by name

Popular brands

ASROCK ROME2D32GM-2T, User Manual

Search results

Summary of Contents for ROME2D32GM-2T

Reviews:

Related manuals for ROME2D32GM-2T

Brands by name

Popular brands