4
English
** here are two LEDs on each LAN port. Please refer to the table below for the LAN port LED indications.
Activity / Link LED
Speed LED
Status
Description
Status
Description
Of
No Link
Of
10Mbps connection
Blinking
Data Activity
Orange
100Mbps connection
On
Link
Green
1Gbps connection
ACT/LINK LED
SPEED LED
LAN Port
*** If you use a 2-channel speaker, please connect the speaker’s plug into “Front Speaker Jack”. See the table below
for connection details in accordance with the type of speaker you use.
Audio Output
Channels
Front Speaker
(No. 8)
Rear Speaker
(No. 6)
Central / Bass
(No. 5)
Line In or
Side Speaker
(No. 7)
2
V
--
--
--
4
V
V
--
--
6
V
V
V
--
8
V
V
V
V
To enable Multi-Streaming, you need to connect a front panel audio cable to the front
panel audio header. Ater restarting your computer, you will ind the “Mixer” tool
on your system. Please select “Mixer ToolBox” , click “Enable playback multi-
streaming”, and click “ok”. Choose “2CH”, “4CH”, “6CH”, or “8CH” and then you are
allowed to select “Realtek HDA Primary output” to use the Rear Speaker, Central/
Bass, and Front Speaker, or select “Realtek HDA Audio 2nd output” to use the front
panel audio.
* HDMI and DisplayPort 1.2 cannot output at the same time. You can only choose either one of them. Please refer
to the BIOS setup option “HDMI/DP Switch“ on page 40 of user manual in the support CD.
Summary of Contents for QC5000-ITX
Page 2: ......
