32
2.11 Onboard Headers and Connectors
Onboard headers and connectors are NOT jumpers. Do NOT place
jumper caps over these headers and connectors. Placing jumper caps
over the headers and connectors will cause permanent damage of the
motherboard!
Serial ATA2 Connectors
These four Serial ATA2 (SATA2)
(SATA2_2: see p.13, No. 16)
connectors support SATA data
(SATA2_3: see p.13, No. 19)
cables for internal storage
(SATA2_4: see p.13, No. 15)
devices. The current SATA2
(SATA2_5: see p.13, No. 20)
interface allows up to 3.0 Gb/s
data transfer rate.
Serial ATA3 Connectors
These two Serial ATA3
(SATA3_0: see p.13, No. 17)
(SATA3) connectors support
(SATA3_1: see p.13, No. 18)
SATA data cables for internal
storage devices. The current
SATA3 interface allows up to 6.0
Gb/s data transfer rate.
Serial ATA (SATA)
Either end of the SATA data
Data Cable
cable can be connected to the
(Optional)
SATA / SATA2 / SATA3 hard
disk or the SATA2 / SATA3
connector on this motherboard.
SATA3_0
SATA3_1
SATA2_4 SATA2_2
SATA2_5 SATA2_3
Print Port Header
This is an interface for print port
(25-pin LPT1)
cable that allows convenient
(see p.13, No. 29)
connection of printer devices.
