2 4
2 4
2 4
2 4
2 4
Primary IDE connector (Blue)
(39-pin IDE1, see p.11/12 No. 8)
Note: Please refer to the instruction of your IDE device vendor for the details.
Serial ATAII Connectors
These six Serial ATAII (SATAII)
(SATAII_1 (Port0):
connectors support SATA data
see p.11/12, No. 11)
cables for internal storage
(SATAII_2 (Port1):
devices. The current SATAII
see p.11/12, No. 12)
interface allows up to 3.0 Gb/s
(SATAII_3 (Port2):
data transfer rate.
see p.11/12, No. 13)
(SATAII_4 (Port3):
see p.11/12, No. 14)
(SATAII_5 (Port4):
see p.11/12, No. 16)
(SATAII_6 (Port5):
see p.11/12, No. 15)
SATAII_6 (Port5) connector can be used for internal storage device or
be connected to eSATAII connector to support eSATAII device. Please
read “eSATAII Interface Introduction” on page 30 for details about eSATAII
and eSATAII installation procedures.
connect the black end
to the IDE devices
connect the blue end
to the motherboard
IDE
1
PIN1
80-conductor ATA 66/100/133 cable
SA
TAII_5 SA
TAII_3 SA
TAII_1
(Port4) (Port2) (Port0)
SA
TAII_6 SA
TAII_4 SA
TAII_2
(Port5) (Port3) (Port1)
eSATAII Connector
This eSATAII connector
(eSATAII_TOP: see p.11, No. 39
supports SATA data cable for
or p.12, No. 38)
external SATAII function. The
current eSATAII interface
allows up to 3.0 Gb/s data
transfer rate.
eSATAII_TOP
Serial ATA (SATA)
Either end of the SATA data cable
Data Cable
can be connected to the SATA /
(Optional)
SATAII hard disk or the SATAII
connector on this motherboard.
You can also use the SATA data
cable to connect SATAII_6 (Port5)
connector and eSATAII connector.
