ASROCK K8NF4G-VSTA, Installation Manual, Page: 19 / 128

1 9 1 9 1 9 1 9 1 9
ASRock K8NF4G-VSTA Motherboard
EnglishEnglishEnglishEnglishEnglish
After step1, 2, 3, you can start to install Windows
®
2000 / Windows
®
XP / Windows
®
XP 64-bit / Windows
®
Vista
TM
.
NOTE. If you install Windows
®
2000 / Windows
®
XP / Windows
®
XP 64-bit / Windows
®
Vista
TM
on IDE HDDs and want to manage (create, convert, delete, or rebuild) RAID functions
on SATA / SATAII HDDs, you still need to set up “SATAII Operation Mode” to [RAID]
first. Then, please set the RAID configuration by using “RAID Utility for Windows
Guide” in Windows ® environment. Please refer to the document in the Support CD,
“Guide to nVidia RAID Utility for Windows”, which is located in the folder at the
following path:
.. \Information\Manual\RAID Utility for Windows Guide
2.12 2.12 2.12 2.12 2.12 Untied Overclocking T Untied Overclocking T Untied Overclocking T Untied Overclocking T Untied Overclocking Technology echnology echnology echnology echnology
This motherboard supports Untied Overclocking Technology, which means during
overclocking, FSB enjoys better margin due to fixed PCI / PCIE buses. Before you
enable Untied Overclocking function, please enter “Overclock Mode” option of BIOS
setup to set the selection from [Auto] to [CPU, PCIE, Async.]. Therefore, CPU FSB is
untied during overclocking, but PCI and PCIE buses are in the fixed mode so that FSB
can operate under a more stable overclocking environment.
Before you start to configure the RAID function, you need to
check the installation guide in the Support CD for proper configuration.
Please refer to the document in the Support CD, “Guide to SATA Hard
Disks Installation and RAID Configuration”, which is located in the folder
at the following path:
.. \Information\Manual\RAID Installation Guide