ASROCK K8NF4G-VSTA, Installation Manual, Page: 17 / 128

1 7 1 7 1 7 1 7 1 7
ASRock K8NF4G-VSTA Motherboard
EnglishEnglishEnglishEnglishEnglish
2.8 Serial A 2.8 Serial A
2.8 Serial A 2.8 Serial A
2.8 Serial ATTTTTA (SA A (SA
A (SA A (SA
A (SATTTTTA) / Serial A A) / Serial A
A) / Serial A A) / Serial A
A) / Serial ATTTTTAII (SA AII (SA
AII (SA AII (SA
AII (SATTTTTAII) Hard Disks AII) Hard Disks
AII) Hard Disks AII) Hard Disks
AII) Hard Disks
Installation Installation Installation Installation Installation
This motherboard adopts nVidia
®
nForce 410 MCP southbridge chipset that
supports Serial ATA (SATA) / Serial ATAII (SATAII) hard disks and RAID functions.
You may install SATA / SATAII hard disks on this motherboard for internal storage
devices. This section will guide you to install the SATA / SATAII hard disks.
STEP 1: Install the SATA / SATAII hard disks into the drive bays of your chassis.
STEP 2: Connect the SATA power cable to the SATA / SATAII hard disk.
STEP 3: Connect one end of the SATA data cable to the motherboard’s SATAII
connector.
STEP 4: Connect the other end of the SATA data cable to the SATA / SATAII hard
disk.
2.9 2.9 2.9 2.9 2.9 HDMR Card Driver Installation HDMR Card Driver Installation HDMR Card Driver Installation HDMR Card Driver Installation HDMR Card Driver Installation
When you install the drivers to your system, please make sure to install Realtek
Audio driver before installing HDMR card driver; for other drivers installation,
please follow the driver order in our support CD. It is suggested to install Win-
dows
®
OS, Realtek Audio and HDMR drivers with the HDMR card inserted to this
motherboard; in this way, there is no problem on the Audio CODEC function.
However, if you install Windows
®
XP 64-bit OS without HDMR card inserted and
plan to insert the HDMR card to this motherboard, please install the Realtek Audio
driver again; otherwise, the Audio CODEC will not work. If you install Windows ®
2000 / XP OS without HDMR card inserted and plan to insert the HDMR card to this
motherboard, you just have to restart your computer, then the Audio CODEC can
work successfully.