13
2.4 Expansion Slots (mini-PCIe, PCI Express and M.2 Slots)
There is 1 mini-PCIe slot, 1 PCI Express slot and 2 M.2 slots on this motherboard.
mini-PCIe slot:
MINI_PCIE1 (mini-PCIe slot; half/full size) is used for PCI Express mini
cards.
PCIE slot:
PCIE1 (PCIE x1 slot) is used for PCI Express x1 lane width cards.
M.2 slots:
M2 Slot (Key M) supports type 2242/2260/2280 M.2 SATA2 3.0 Gb/s
module. (Shared with SATA2_2)
Installing an expansion card
Step 1.
Before installing the expansion card, please make sure that the power
supply is switched off or the power cord is unplugged. Please read the
documentation of the expansion card and make necessary hardware
settings for the card before you start the installation.
Step 2.
Remove the system unit cover (if your motherboard is already installed
in a chassis).
Step 3.
Remove the bracket facing the slot that you intend to use. Keep the
screws for later use.
Step 4.
Align the card connector with the slot and press firmly until the card is
completely seated on the slot.
Step 5.
Fasten the card to the chassis with screws.
Step 6.
Replace the system cover.
NA
NA
NA
NA
NA
GND
NA
NA
NA
SATA_RX
SATA_RX#
SATA_TX#
SATA_TX
