manualshive.com logo in svg

ASROCK H87 Pro4, Installation And Configuration Manual, Page: 1 / 20

Share
Download
ASROCK H87 Pro4 Installation And Configuration Manual Download Page 1

1

Guide to SATA Hard Disks 

Installation and RAID Configuration

1. 

Guide to SATA Hard Disks Installation ..............................2

 
 

1.1  Serial ATA (SATA) Hard Disks Installation ................2

2. 

Guide to RAID Configurations

 ...........................................3

 

2.1  Introduction of RAID .................................................3

 

 

2.2  RAID Configuration Precautions

 ..............................6

 

2.3  Installing Windows

®

 8 / 8 64-bit / 7 / 7 64-bit With 

 

 

RAID Functions ........................................................7

 

2.4  Setting the BIOS RAID Items

 ...................................8

 

2.5  Configuring a RAID array

 .........................................8

 

2.5.1

  Configuring a RAID array Using UEFI Setup Utility

 ...... 8

 

2.5.2

  Configuring a RAID array Using Intel RAID BIOS

 ...... 13

3. 

Installing Windows

®

 on a HDD under 2TB in RAID 

 

mode  

 

 ..................................................................17

4. 

Installing Windows

®

 on a HDD larger than 2TB in 

 

RAID mode 

 ..................................................................18

Summary of Contents for H87 Pro4





















Reviews:

No comments