ASROCK H61M-VGS R2.0 Page 48 User Manual Download

Page: 48 / 55

3.4.8 ACPI Configuration

Suspend to RAM

Use this item to select whether to auto-detect or disable the Suspend-to-
RAM feature. Selecting [Auto] will enable this feature if the OS supports it.

Check Ready Bit

Use this item to enable or disable the feature Check Ready Bit.

ACPI HPET Table

Use this item to enable or disable ACPI HPET Table. The default value is

[Enabled]. Please set this option to [Enabled] if you plan to use this

motherboard to submit Windows

Vista

certification.

PS/2 Keyboard Power On

Use this item to enable or disable PS/2 keyboard to turn on the system
from the power-soft-off mode.

PCI Devices Power On

Use this item to enable or disable PCI devices to turn on the system from

the power-soft-off mode.

Ring-In Power On

Use this item to enable or disable Ring-In signals to turn on the system

from the power-soft-off mode.

RTC Alarm Power On

Use this item to enable or disable RTC (Real Time Clock) to power on the

system.

USB Keyboard/Remote Power On

Use this item to enable or disable USB Keyboard/Remote to turn on the

system from the power-soft-off mode.

USB Mouse Power On

Use this item to enable or disable USB Mouse to turn on the system from

the power-soft-off mode.

Summary of Contents for H61M-VGS R2.0























































Search results

Summary of Contents for H61M-VGS R2.0

Reviews:

Related manuals for H61M-VGS R2.0

Brands by name

Popular brands

ASROCK H61M-VGS R2.0, User Manual

Search results

Summary of Contents for H61M-VGS R2.0

Reviews:

Related manuals for H61M-VGS R2.0

Brands by name

Popular brands