11
ASRock H61M-DP3/ASM Motherboard
1.5 Onboard Headers and Connectors
Onboard headers and connectors are NOT jumpers. Do NOT place
jumper caps over these headers and connectors. Placing jumper caps
over the headers and connectors will cause permanent damage of the
motherboard!
Serial ATA2 Connectors
These four Serial ATA2
(SATA_0: see p.3, No. 13)
(SATA2) connectors support
(SATA_1: see p.3, No. 11)
SATA data cables for internal
(SATA_2: see p.3, No. 14)
storage devices. The current
(SATA_3: see p.3, No. 10)
SATA2 interface allows up to
3.0 Gb/s data transfer rate.
Serial ATA (SATA)
Either end of the SATA data
Data Cable
cable can be connected to the
(Optional)
SATA2 hard disk or the SATA2
connector on this motherboard.
USB 2.0 Headers
Besides four default USB 2.0
(9-pin USB4_5)
ports on the I/O panel, there
(see p.3 No. 16)
are two USB 2.0 headers on
this motherboard. Each
USB 2.0 header can support
two USB 2.0 ports.
(9-pin USB6_7)
(see p.3 No. 15)
Consumer Infrared Module Header
This header can be used to
(4-pin CIR1)
connect the remote
(see p.3 No. 17)
controller receiver.
SATA_3 SATA_1
SATA_2 SATA_0
English
