ASROCK H55M-GE, User Manual

Page: 17 / 209

1 7 1 7 1 7 1 7 1 7
ASRock H55M-GE Motherboard
2.6 Onboard Headers and Connectors 2.6 Onboard Headers and Connectors
2.6 Onboard Headers and Connectors 2.6 Onboard Headers and Connectors
2.6 Onboard Headers and Connectors
Onboard headers and connectors are NOT jumpers. Do NOT place
jumper caps over these headers and connectors. Placing jumper caps
over the headers and connectors will cause permanent damage of the
motherboard!
Serial ATA (SATA) Either end of the SATA data cable
Data Cable can be connected to the SATA /
(Optional)
SATAII hard disk or the SATAII
connector on this motherboard.
Serial ATAII Connectors These six Serial ATAII (SATAII)
(SATAII_1: see p.2, No. 15)
connectors support SATA data
(SATAII_2: see p.2, No. 14)
cables for internal storage
(SATAII_3: see p.2, No. 12)
devices. The current SATAII
(SATAII_4: see p.2, No. 16)
interface allows up to 3.0 Gb/s
(SATAII_5: see p.2, No. 17)
data transfer rate.
(SATAII_6: see p.2, No. 19)
EnglishEnglishEnglishEnglishEnglish
If you clear the CMOS, the case open may be detected. Please adjust
the BIOS option “Clear Status” to clear the record of previous chassis
intrusion status.
SA
T
AII_6 SA
T
AII_3
SA
T
AII_5 SA
T
AII_2
SA
T
AII_4 SA
T
AII_1
USB 2.0 Headers Besides six default USB 2.0
(9-pin USB10_11)
ports on the I/O panel, there are
(see p.2 No. 25)
three USB 2.0 headers on this
motherboard. Each USB 2.0
header can support two USB
2.0 ports.
(9-pin USB8_9)
(see p.2 No. 24)
(9-pin USB6_7)
(see p.2 No. 22)