ASROCK H410M-HDV, User Manual

Page: 46 / 75

English
41
H410M-HDV
H410M-HVS
Boot Performance Mode
Select the performance state that the BIOS will set before OS handoff.
FCLK Frequency
Configure the FCLK Frequency.
Ring to Core Ratio Offset
Disable Ring to Core Ratio Offset so the ring and core can run at the same fre-
quency.
Intel SpeedStep Technology
Intel SpeedStep technology allows processors to switch between multiple frequen-
cies and voltage points for better power saving and heat dissipation.
Intel Turbo Boost Technology
Intel Turbo Boost Technology enables the processor to run above its base operating
frequency when the operating system requests the highest performance state.
Intel Speed Shift Technology
Enable/Disable Intel Speed Shift Technology support. Enabling will expose the
CPPC v2 interface to allow for hardware controlled P-states.
Intel Thermal Velocity Boost Voltage Optimizations
This service controls thermal based voltage optimizations for processors that
implment the Intel Thermal Velocity Boost (TVB) feature.
DRAM Configuration
Memory Information
Allows users to browse the serial presence detect (SPD) and Intel extreme memory profile
(XMP) for DDR4 modules.
DRAM Timing Configuration
Load XMP Setting
Load XMP settings to overclock the memory and perform beyond standard specifications.
DRAM Frequency
If [Auto] is selected, the motherboard will detect the memory module(s) inserted
and assign the appropriate frequency automatically.