ASROCK FM2A88X Extreme6 Page 35 User Manual Download

Page: 35 / 80

2.9.2 Installing Three CrossFireX

-Ready Graphics Cards

Step 3

Connect a VGA cable or a DVI cable
to the monitor connector or the DVI

connector of the graphics card that is

inserted to PCIE2 slot.

Step 1

Insert one graphics card into PCIE2

slot, another graphics card to PCIE4

slot, and the other graphics card to

PCIE5 slot. Make sure that the cards

are properly seated on the slots.

Step 2

Use one CrossFire Bridge to connect

the graphics cards on PCIE2 and

PCIE4 slots, and use the other

CrossFire Bridge to connect the

graphics cards on PCIE4 and

PCIE5 slots. (The CrossFire Bridge

is provided with the graphics card

you purchase, not bundled with this

motherboard. Please refer to your

graphics card vendor for details.)

Step 3

Connect a VGA cable or a DVI cable
to the monitor connector or the DVI

connector of the graphics card that is

inserted to PCIE2 slot.

CrossFire Bridge

Summary of Contents for FM2A88X Extreme6

















































































Search results

Summary of Contents for FM2A88X Extreme6

Reviews:

Related manuals for FM2A88X Extreme6

Brands by name

Popular brands

ASROCK FM2A88X Extreme6, User Manual

Search results

Summary of Contents for FM2A88X Extreme6

Reviews:

Related manuals for FM2A88X Extreme6

Brands by name

Popular brands