ASROCK Fatal1ty X79 Champion Page 63 User Manual Download | Manualshive

Page: 63 / 100

background image

63

2.17 Serial ATA (SATA) / Serial ATA2 (SATA2) Hard Disks Installation

This motherboard adopts Intel

®

X79 chipset that supports Serial ATA (SATA) / Serial

ATA2 (SATA2) hard disks and RAID (RAID 0, RAID 1, RAID 5, RAID 10 and Intel
Rapid Storage 3.0) functions. You may install SATA / SATA2 hard disks on this
motherboard for internal storage devices. This section will guide you to install the
SATA / SATA2 hard disks.

STEP 1:  Install the SATA / SATA2 hard disks into the drive bays of your chassis.
STEP 2:  Connect the SATA power cable to the SATA / SATA2 hard disk.
STEP 3:  Connect one end of the SATA data cable to the motherboard’s SATA2 con-

nector.

STEP 4: Connect the other end of the SATA data cable to the SATA / SATA2 hard

disk.

2.18 Serial ATA3 (SATA3) Hard Disks Installation

This motherboard adopts Intel

®

X79 chipset that supports Serial ATA3 (SATA3) hard

disks and RAID (RAID 0, RAID 1, RAID 5, RAID 10 and Intel Rapid Storage 3.0)
functions for SATA3_0 and SATA3_1 connectors. It also adopts Marvell SE9230
chipsets which support Serial ATA3 (SATA3) hard disks and RAID (RAID 0, RAID 1
and RAID10) for SATA3_M0 to SATA3_M3 connectors. You may install SATA3 hard
disks on this motherboard for internal storage devices. This section will guide you to
install the SATA3 hard disks.

STEP 1:  Install the SATA3 hard disks into the drive bays of your chassis.
STEP 2:  Connect the SATA power cable to the SATA3 hard disk.
STEP 3:  Connect one end of the SATA data cable to the motherboard’s SATA3 con-

nector.

STEP 4: Connect the other end of the SATA data cable to the SATA3 hard disk.

«
...
61
62
63
64
65
...
»

Summary of Contents for Fatal1ty X79 Champion





































































































Reviews:

No comments

Related manuals for Fatal1ty X79 Champion

Brand: ECS Pages: 46

SAM9N12/CN11-EK

Brand: Atmel Pages: 69

LCMXO3L-DSI-EVN

Brand: Lattice Pages: 2

Brand: Texas Instruments Pages: 7

Brand: MSI Pages: 90

Brand: TYAN Pages: 37

Brand: J&W Pages: 42

Brand: Acorp Pages: 46

Brand: EVGA Pages: 163

Brand: MATSONIC Pages: 76

ATX-KLS0 Series

Brand: Quanmax Pages: 69

Brand: JETWAY Pages: 50

Brand: Linear Technology Pages: 8

Brand: NXP Semiconductors Pages: 19

Brand: Quantum Design Pages: 59

Brand: Quantum Design Pages: 75

Brand: Dynatem Pages: 57

Brand: Intel Pages: 36

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands