ASROCK Fatal1ty X79 Champion Page 57 User Manual Download

Page: 57 / 100

The Installation Guide of Front USB 3.0 Panel

Intall the Front USB 3.0 Panel into the 2.5”
drive bay of the chassis.

Step

Screw the Front USB 3.0 Panel to the
drive bay with six chassis screws.

Prepare the bundled Front USB 3.0 Panel, four
HDD screws, and six chassis screws.

Step

Screw the 2.5” HDD/SSD to the Front
USB 3.0 Panel with four HDD screws.

The Installation Guide of Rear USB 3.0 Bracket

Put the USB 3.0 cable and the rear
USB 3.0 bracket together.

Unscrew the two screws from the Front USB 3.0
Panel.

Step

Put the rear USB 3.0 bracket into the
chassis.

Screw the two screws into the rear USB 3.0
bracket.

Step

The Front USB 3.0 Panel is ready to use.

Plug the Front USB 3.0 cable into the USB 3.0
header (USB3_9_10 or USB3_11_12) on the
motherboard.

Step

Summary of Contents for Fatal1ty X79 Champion




































































































Search results

Summary of Contents for Fatal1ty X79 Champion

Reviews:

Related manuals for Fatal1ty X79 Champion

Brands by name

Popular brands

ASROCK Fatal1ty X79 Champion, User Manual

Search results

Summary of Contents for Fatal1ty X79 Champion

Reviews:

Related manuals for Fatal1ty X79 Champion

Brands by name

Popular brands