manualshive.com logo in svg

ASROCK E3C224D41-14S, User Manual, Page: 42 / 64

Share
Download
ASROCK E3C224D41-14S User Manual Download Page 42

36

English

3.3.7 USB Coniguration

USB Controller

Use this item to enable or disable the use of USB controller. he default value is [Enabled].

Intel USB 3.0 Mode

Use t his item to enable or disable t he use of Intel USB 3.0 mode. There are four 

coniguration options: [Smart Auto], [Auto], [Disabled] and [Enabled]. he default value is 

[Smart Auto].

Legacy USB Support

Use this option to select legacy support for USB devices. There are four configuration 

options: [Enabled], [Auto], [Disabled] and [UEFI Setup Only]. he default value is [Enabled]. 

Please refer to below descriptions for the details of these four options: 

Option

Description

Enabled

Enables support for legacy USB. 

Auto

Enables legacy support if USB devices are connected..

Disabled

USB devices are not allowed to use under legacy OS and UEFI 

setup when [Disabled] is selected. If you have USB compatibility 

issues, it is recommended to select [Disabled] to enter OS.

UEFI Setup Only

SB devices are allowed to use only under UEFI setup and Windows 

/ Linux OS.

Summary of Contents for E3C224D41-14S

































































Reviews:

No comments