background image

2

Copyright Notice:

No part of this manual may be reproduced, transcribed, transmitted, or translated in 
any language, in any form or by any means, except duplication of documentation by 
the purchaser for backup purpose, without written consent of ASRock Rack Inc.
Products and corporate names appearing in this manual may or may not be regis-
tered trademarks or copyrights of their respective companies, and are used only for 

identification or explanation and to the owners’ benefit, without intent to infringe.

Disclaimer:

Specifications and information contained in this manual are furnished for informa

-

tional use only and subject to change without notice, and should not be constructed 
as a commitment by ASRock Rack. ASRock Rack assumes no responsibility for any 
errors or omissions that may appear in this manual.
With respect to the contents of this manual, ASRock Rack does not provide war-
ranty of any kind, either expressed or implied, including but not limited to the implied 

warranties or conditions of merchantability or fitness for a particular purpose.
In no event shall ASRock Rack, its directors, officers, employees, or agents be li

-

able for any indirect, special, incidental, or consequential damages (including dam-

ages for loss of profits, loss of business, loss of data, interruption of business and 

the like), even if ASRock Rack has been advised of the possibility of such damages 
arising from any defect or error in the manual or product.

This device complies with Part 15 of the FCC Rules. Operation is subject to the fol-
lowing two conditions:
(1)  this device may not cause harmful interference, and 
(2)  this device must accept any interference received, including interference that  

may cause undesired operation.

CALIFORNIA, USA ONLY

The Lithium battery adopted on this motherboard contains Perchlorate, a toxic 
substance controlled in Perchlorate Best Management Practices (BMP) regulations 
passed by the California Legislature. When you discard the Lithium battery in Cali-
fornia, USA, please follow the related regulations in advance.
“Perchlorate Material-special handling may apply, see 
www.dtsc.ca.gov/hazardouswaste/perchlorate”
 

ASRock Rack Website: http://www.ASRockRack.com

Summary of Contents for E3C224

































































































Reviews: