28
English
2.9 Unit Identiication purpose LED/Switch
With the UID button, You are able to locate the server you’re working on from behind
a rack of servers.
Unit Identiication
purpose LED/Switch
(UID1)
When the UID button on the
front or rear panel is pressed,
the front/rear UID blue LED
indicator will be turned on.
Press the UID button again to
turn of the indicator.
2.10 Driver Installation Guide
To install the drivers to your system, please insert the support CD to your optical
drive irst. hen, the drivers compatible to your system can be auto-detected and listed
on the support CD driver page. Please follow the order from top to bottom to install
those required drivers. herefore, the drivers you install can work properly.
If you want to use RAID mode on SATA ports, please make a copy of “Serial ATA For
Floppy Disk” driver from the support CD to your USB storage device irst. Browse and in-
stall this driver during the installation of your operating system. Ater installing the driver,
you may continue to install the operating system.
