English
26
Thunderbolt AIC
Connector
(5-pin TB1)
(see p.1, No. 24)
Please connect a Thunderbolt™
add-in card (AIC) to this
connector via the GPIO cable.
*Please install the Thunderbolt™
AIC card to PCIE3 (default slot).
RGB LED Headers
(4-pin RGB_LED1)
(see p.1, No. 6)
(4-pin RGB_LED2)
(see p.1, No. 26)
These two RGB LED headers are
used to connect RGB LED
extension cables which allow
users to choose from various LED
lighting effects.
Caution: Never install the RGB
LED cable in the wrong orienta-
tion; otherwise, the cable may
be damaged.
*Please refer to page 33 for for
further instructions on this
header.
Addressable LED Headers
(3-pin ADDR_LED1)
(see p.1, No. 7)
(3-pin ADDR_LED2)
(see p.1, No. 27)
These two headers are used to
connect Addressable LED
extension cables which allow
users to choose from various LED
lighting effects.
Caution:
Never install the
Addressable LED cable in the
wrong orientation; otherwise,
the cable may be damaged.
*Please refer to page 34 for
further instructions on this
header.
Post Status Checker
(see p.1)
Post Status Checker (PSC)
diagnoses the computer when
users power on the machine.
It emits a red light to indicate
whether the CPU, memory, VGA
or storage is dysfunctional. The
lights go off if the four mentioned
above are functioning normally.
VOUT
DO_ADDR
GND
1
VOUT
DO_ADDR
GND
1
+12V G
R
B
1
G
R
B
1
+12V
DRAM
CPU
VGA
BOOT
