ASROCK B460 STEEL LEGEND Page 70 User Manual Download

Page: 70 / 97

English

ODT NOM (B1)

Use this to change ODT (CH B1) Auto/Manual settings. The default is [Auto].

ODT NOM (B2)

Use this to change ODT (CH B2) Auto/Manual settings. The default is [Auto].

ODT PARK (A1)

Configure the memory on die termination resistors' PARK for channel A1.

ODT PARK (A2)

Configure the memory on die termination resistors' PARK for channel A2.

ODT PARK (B1)

Configure the memory on die termination resistors' PARK for channel B1.

ODT PARK (B2)

Configure the memory on die termination resistors' PARK for channel B2.

Advanced Setting

ASRock Timing Optimization

Configure the fast path through the MRC.

Realtime Memory Timing

Configure the realtime memory timings.

[Enabled] The system will allow performing realtime memory timing changes after
MRC_DONE.

Command Tristate

Configure the Command Tristate Support.

Exit On Failure

Configure the Exit On Failure for MRC training steps.

Reset On Training Fail

Reset system if the MRC training fails.

MRC Fast Boot

Enable Memory Fast Boot to skip DRAM memory training for booting faster.

Summary of Contents for B460 STEEL LEGEND


































































































Search results

Summary of Contents for B460 STEEL LEGEND

Reviews:

Related manuals for B460 STEEL LEGEND

Brands by name

Popular brands

ASROCK B460 STEEL LEGEND, User Manual

Search results

Summary of Contents for B460 STEEL LEGEND

Reviews:

Related manuals for B460 STEEL LEGEND

Brands by name

Popular brands