4 5
4 5
4 5
4 5
4 5
3.3.4
3.3.4
3.3.4
3.3.4
3.3.4 IDE Configuration
IDE Configuration
IDE Configuration
IDE Configuration
IDE Configuration
Serial ATA Controller
Enable the SATA controller by selecting [Enabled]. The default value of this
option is [Enabled]. Configuration options: [Enabled] and [Disabled].
SATA Operation Mode
Use this item to adjust SATA Operation Mode. The default value of this
option is [RAID]. Configuration options: [RAID], [non-RAID] and [AHCI].
eSATAII Support
Use this item to enable or disable eSATAII support. The default value of this
option is [Enabled]. Configuration options: [Enabled], [Disabled].
SATA PHY DeLimiter
Configuration options: [Auto], [Enabled], and [Disabled]. The default value
is [Disabled].
IDE Device Configuration
You may set the IDE configuration for the device that you specify. We will
use the “Primary IDE Master” as the example in the following instruction,
which can be applied to the configurations of “Primary IDE Slave”, “Sec-
ondary IDE Master”, and “Secondary IDE Slave” as well.
BIOS SETUP UTILITY
IDE Configuration
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
Advanced
Serial ATA Controller
Primary IDE Master
Primary IDE Slave
Secondary IDE Master
Secondary IDE Slave
[Enabled]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
Select Screen
Select Item
+-
Change Option
F1
General Help
F9
Load Defaults
F10
Save and Exit
ESC
Exit
Select Screen
Select Item
+-
Change Option
F1
General Help
F9
Load Defaults
F10
Save and Exit
ESC
Exit
Disabled
Enabled
SATA Operation Mode
eSATAII Support
SATA PHY DeLimiter
[RAID]
[Enabled]
[Disabled]
