ASROCK ALIVENF4G-DVI, User Manual

Page: 32 / 46

3 2 3 2 3 2 3 2 3 2
Boot Failure Guard
Enable or disable the feature of Boot Failure Guard.
CPU Spread Spectrum
This feature will be set to [Enabled] as default. Configuration
options: [Disabled], and [Enabled].
PCIE Spread Spectrum
This feature will be set to [Enabled] as default. Configuration
options: [Disabled], and [Enabled].
SATA Spread Spectrum
This feature will be set to [Enabled] as default. Configuration
options: [Disabled], and [Enabled].
HT Spread Spectrum
This feature will be set to [Center Spread] as default. Configuration
options: [Disabled], [Center Spread], and [Down Spread].
Cool ‘n’ Quiet
Use this item to enable or disable AMD’s Cool ‘n’ Quiet TM technology.
Dual Core Support
This item will show if you use Dual Core CPU. Configuration optiona: [Enabled],
[Disabled]. The default value is [Enabled].
Processor Maximum Multiplier
It will display Processor Maximum Multiplier for reference.
Processor Maximum Voltage
It will display Processor Maximum Voltage for reference.
Multiplier/Voltage Change
This item is set to [Auto] by default. If it is set to [Manual], you may adjust the
value of Processor Multiplier and Processor Voltage. However, it is recom-
mended to keep the default value for system stability.
BIOS SETUP UTILITY
CPU Configuration
Select Screen
Select Item
+- Change Option
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
Advanced
Select Screen
Select Item
+- Change Option
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
CPU Frequency (MHz)
PCIE Frequency (MHz)
Overclock Mode
[200]
[100]
[Auto]
CPU Spread Spectrum
PCIE
SATA
HT
Cool' n' Quiet
Dual Core Support
Spread Spectrum
Spread Spectrum
Spread Spectrum
[Enabled]
[Enabled]
[Enabled]
[Center Spread]
[Enabled]
[Enabled]
Processor Maximum Multiplier
Processor Maximum Voltage x11
1.550 V
Boot Failure Guard [Enabled]
Multiplier/Voltage Change [Manual]
If AUTO, multiplier and
voltage will be left at the
rated frequency/voltage. If
Manual,
will be set based
on User Selection in Setup.
multiplier and
voltage
Processor Multiplier
Processor Voltage
[x8]
[1.500V]
Memory Clock
Flexibility Option
[Auto]
[Disabled]
Processor Multiplier
This item will show when “Multiplier/Voltage Change” is set to [Manual];
otherwise, it will be hidden. You may set the value from [x8] up to [x25] but