ASROCK A785GM-LE Page 50 User Manual Download

Page: 50 / 63

5 0

AM2 Boost

This option appears only when you adopt AM2 CPU. If you set this option to

[Enabled], you will enable ASRock AM2 Boost function, which will improve

the memory performance. The default value is [Disabled]. Please refer to

caution 15 on page 12 for details.

Boot Failure Guard

Enable or disable the feature of Boot Failure Guard.

Cool ‘n’ Quiet

Use this item to enable or disable AMD’s Cool ‘n’ Quiet

technology. The

default value is [Auto]. Configuration options: [Auto], [Enabled] and

[Disabled]. If you install Windows

Vista

and want to enable this function,

please set this item to [Enabled]. Please note that enabling this function may

reduce CPU voltage and memory frequency, and lead to system stability or

compatibility issue with some memory modules or power supplies. Please

set this item to [Disable] if above issue occurs.

Secure Virtual Machine

When this option is set to [Enabled], a VMM (Virtual Machine Architecture)

can utilize the additional hardware capabilities provided by AMD-V. The

default value is [Enabled]. Configuration options: [Enabled] and [Disabled].

Enhance Halt State

This option appears only when you adopt Phenom CPU. All processors

support the Halt State (C1). The C1 state is supported through the native

processor instructions HLT and MWAIT and requires no hardware support

from the chipset. In the C1 power state, the processor maintains the con-

text of the system caches.

L3 Cache Allocation

This option appears only when you adopt Phenom CPU. The default value

is [Auto]. Configuration options: [Auto], [BSP Only] and [All Cores].

3.4.1

3.4.1 CPU Configuration

CPU Configuration

BIOS SETUP UTILITY

CPU Configuration

Select Screen
Select Item

Change Option

General Help

Load Defaults

F10

Save and Exit

ESC

Exit

Advanced

Select Screen
Select Item

Change Option

General Help

Load Defaults

F10

Save and Exit

ESC

Exit

Boot Failure Guard

[Enabled]

Cool' n' Quiet
Secure Virtual Machine
Enhanced Halt State
L3 Cache Allocation

[Auto]
[Enabled]
[Disabled]
[Auto]

Enable or disable the
feature of Boot
Failure Guard.

Summary of Contents for A785GM-LE































































Search results

Summary of Contents for A785GM-LE

Reviews:

Related manuals for A785GM-LE

Brands by name

Popular brands

ASROCK A785GM-LE, User Manual

Search results

Summary of Contents for A785GM-LE

Reviews:

Related manuals for A785GM-LE

Brands by name

Popular brands