ASROCK A785GM-LE Page 34 User Manual Download

Page: 34 / 63

3 4

2.13

2.13 Driver Installation Guide

Driver Installation Guide

To install the drivers to your system, please insert the support CD to your optical

drive first. Then, the drivers compatible to your system can be auto-detected and

listed on the support CD driver page. Please follow the order from up to bottom

side to install those required drivers. Therefore, the drivers you install can work

properly.

2.14

2.14 Installing Windows

Installing Windows

XP / XP 64-bit / Vista

Vista

64-bit W

64-bit With RAID F

ith RAID F

ith RAID Functions

unctions

If you want to install Windows

XP, Windows

XP 64-bit, Windows

Vista

or Windows

Vista

64-bit on a RAID disk composed of 2 or more SATA / SATAII HDDs with RAID

functions, please follow below procedures according to the OS you install.

2.14.1 Installing Windows

XP / XP 64-bit With RAID

Functions

unctions

If you want to install Windows

XP or Windows

XP 64-bit on a RAID disk composed of

2 or more SATA / SATAII HDDs with RAID functions, please follow below steps.

STEP 1: Set up BIOS.

Enter BIOS SETUP UTILITY

Advanced screen

Storage

Configuration.

Set the “SATA Operation Mode” option to [RAID].

STEP 2: Make a SATA / SATAII Driver Diskette.

Insert the ASRock Support CD into your optical drive to boot your system.

(There are two ASRock Support CD in the motherboard gift box pack, please

choose the one for Windows

XP / XP 64-bit.)

During POST at the beginning of system boot-up, press <F11> key, and

then a window for boot devices selection appears. Please select CD-ROM

as the boot device.

When you see the message on the screen, “Generate Serial ATA driver

diskette [YN]?”, press <Y>.

Then you will see these messages,

Please insert a blank

formatted diskette into floppy

drive A:

press any key to start

Please insert a floppy diskette into the floppy drive, and press any key.

The system will start to format the floppy diskette and copy SATA / SATAII

drivers into the floppy diskette.

Summary of Contents for A785GM-LE































































Search results

Summary of Contents for A785GM-LE

Reviews:

Related manuals for A785GM-LE

Brands by name

Popular brands

ASROCK A785GM-LE, User Manual

Search results

Summary of Contents for A785GM-LE

Reviews:

Related manuals for A785GM-LE

Brands by name

Popular brands