ASROCK A75 Pro4/MVP Page 46 User Manual Download

Page: 46 / 68

Using SATA3 HDDs without NCQ and Hot Plug functions (IDE mode)

STEP 1: Set up UEFI.

Enter UEFI SETUP UTILITY Advanced screen Storage

Confi guration.

Set the “SATA Mode” option to [IDE].

STEP 2: Install Windows

XP / XP 64-bit OS on your system.

2.18 Installing Windows

7 / 7 64-bit / Vista

/ Vista

64-bit / XP /

XP 64-bit Without RAID Functions

If you want to install Windows

7 / 7 64-bit / Vista

/ Vista

64-bit / XP / XP 64-bit

OS on your SATA3 HDDs without RAID functions, please follow below procedures

according to the OS you install.

2.18.1 Installing Windows

XP / XP 64-bit Without RAID Functions

If you want to install Windows

XP / XP 64-bit on your SATA3 HDDs without RAID

functions, please follow below steps.

Using SATA3 HDDs with NCQ and Hot Plug functions (AHCI mode)

STEP 1: Set up UEFI.

Enter UEFI SETUP UTILITY Advanced screen Storage

Confi guration.

Set the “SATA Mode” option to [AHCI].

STEP 2: Make a SATA3 Driver Diskette.

Make a SATA3 driver diskette by following section 2.17.1 step 2 on page 44.

STEP 3: Install Windows

XP / XP 64-bit OS on your system.

You can start to install Windows

XP / XP 64-bit OS on your system. At the begin-

ning of Windows

setup, press F6 to install a third-party AHCI driver. When prompt-

ed, insert the SATA3 driver diskette containing the AMD AHCI driver. After reading

the fl oppy disk, the driver will be presented. Select the driver to install according to

the OS you install.

Summary of Contents for A75 Pro4/MVP




































































Search results

Summary of Contents for A75 Pro4/MVP

Reviews:

Related manuals for A75 Pro4/MVP

Brands by name

Popular brands

ASROCK A75 Pro4/MVP, User Manual

Search results

Summary of Contents for A75 Pro4/MVP

Reviews:

Related manuals for A75 Pro4/MVP

Brands by name

Popular brands