background image

12

1.4  I/O Panel

* There are two LED next to the LAN port. Please refer to the table below for the LAN port LED  
   indications. 
 

 

                   

LAN Port LED Indications

       Activity/Link LED        

SPEED LED

Status        Description            Status           Description 

 

Off           No Link                Off             10Mbps connection
Blinking   Data Activity        Orange      100Mbps connection
On           Link 

         Green        1Gbps connection

 

PS/2  Mouse  Port  (Green)  

 7 

USB 2.0  Ports  (USB45)   

      

      * 2 

LAN  RJ-45  Port   

 8 

USB 2.0  Ports  (USB23)

 

Line  In  (Light  Blue)     

 9 

HDMI  Port 

     ** 4 

Front  Speaker  (Lime) 

10 

D-Sub  Port 

  

 

Microphone  (Pink)  

11 

PS/2  Keyboard  Port  (Purple)  

   *** 6 

USB 2.0  Ports  (USB01)

LAN Port

ACT/LINK

    LED

SPEED

  LED

6

7

9

10

11

1

2

4

3

5

8

** To enable Multi-Streaming function, you need to connect a front panel audio cable to the front  
    panel audio header. After restarting your computer, you will   nd “VIA HD Audio Deck” tool on  
    your system. Please follow below instructions according to the OS you install.
    

For Windows

®

 XP / XP 64-bit OS: 

    Please click “VIA HD Audio Deck” icon               , and click “Speaker”. Then you are allowed to

    select “2 Channel” or “4 Channel”. Click “Power” to save your change. 
    

For Windows

®

 7 / 7 64-bit / Vista

TM

 / Vista

TM

 64-bit OS:

    Please click “VIA HD Audio Deck” icon               , and click “Advanced Options” on the left side 

    on the bottom. In “Advanced Options” screen, select “Independent Headphone”, and click       
    “OK” to save your change.   

Summary of Contents for A55M-HVS





























































Reviews: