manualshive.com logo in svg

ASROCK 939SLI32-ESATA2, Installation And Configuration Manual, Page: 10 / 16

Share
Download
ASROCK 939SLI32-ESATA2 Installation And Configuration Manual Download Page 10

10

Delete RAID Setting & Partition

When RAID BIOS detects a broken RAID, the user can use Delete RAID

Setting & Partition to delete the broken RAID.

1. Press ‘Enter’ key to activate this item. An ‘E’ flash cursor appears at the

    ‘Drive Select Menu’ for the user to choose defined array drives to be

    deleted.

2. ‘Data on RAID drives will be deleted (Y/N)?’ prompt message shows up

    to confirm the user’s selection.

3. Press ‘Y’ key, and then the data in selected drives is destroyed.

4. “RAID Array List” automatically updates itself.

Delete All RAID Setting & Partition

1. Press ‘Enter’ key to activate this item.

2. ‘Data on RAID drives will be deleted (Y/N)?’ prompt message shows up

    to confirm the user’s selection.

3. Press ‘Y’ key, and then the data in drives is destroyed.

4. ‘RAID array List” automatically updates itself.

2.4.2

Drive Select Menu

This menu lists the available drives and their information. There

are three indicator bars in this menu: two RAID Drive Selection

Bar and one Boot Drive Selection Bar.

2.4.3

RAID Array List

This list showa the existing and newly created RAID arrays.

SATAII_BLUE
SATAII_BLACK
SATAII_RED
SATAII_ORANGE

Summary of Contents for 939SLI32-ESATA2

















Reviews:

No comments