ASROCK 890GMH/USB3, Quick Installation Manual

Page: 24 / 79

2 4 2 4
2 4 2 4 2 4
ASRock 890GMH/USB3 Motherboard
EnglishEnglishEnglishEnglishEnglish
Chassis and Power Fan Connectors Please connect the fan cables
(3-pin CHA_FAN1)
to the fan connectors and
(see p.2 No. 12)
match the black wire to the
(3-pin PWR_FAN1)
(see p.2 No. 33)
Chassis Speaker Header Please connect the chassis
(4-pin SPEAKER 1)
speaker to this header.
(see p.2 No. 22)
System Panel Header This header accommodates
(9-pin PANEL1)
several system front panel
(see p.2 No. 21)
functions.
D. MIC_RET and OUT_RET are for HD audio panel only. You don’t
need to connect them for AC’97 audio panel.
E. To activate the front mic.
For Windows
®
XP / XP 64-bit OS:
Select “Mixer”. Select “Recorder”. Then click “FrontMic”.
For Windows ® 7 / 7 64-bit / Vista TM / Vista TM 64-bit OS:
Go to the "FrontMic" Tab in the Realtek Control panel. Adjust
“Recording Volume”.
ATX Power Connector Please connect an ATX power
(24-pin ATXPWR1)
supply to this connector.
(see p.2 No. 8)
12
1
24
13
CPU Fan Connector Please connect the CPU fan
(4-pin CPU_FAN1)
cable to this connector and
(see p.2 No. 2)
match the black wire to the
ground pin.
1
2
3
4
Though this motherboard provides 4-Pin CPU fan (Quiet Fan) support, the 3-Pin
CPU fan still can work successfully even without the fan speed control function.
If you plan to connect the 3-Pin CPU fan to the CPU fan connector on this
motherboard, please connect it to Pin 1-3.
3-Pin Fan Installation
Pin 1-3 Connected