1 6
1 6
1 6
1 6
1 6
2.5
2.5
2.5
2.5
2.5
Installation of Memory Modules (DIMM)
Installation of Memory Modules (DIMM)
Installation of Memory Modules (DIMM)
Installation of Memory Modules (DIMM)
Installation of Memory Modules (DIMM)
This motherboard is equipped with two 184-pin DDR (Double Data Rate) DIMM slots
and two 240-pin DDRII (Double Data Rate) DIMM slots.
1.
It is not allowed to install a DDR memory module into DDRII slot or
a DDRII memory module into DDR slot; otherwise, this motherboard
and DIMM may be damaged.
2.
It is not allowed to install both DDR and DDRII memory modules to
this motherboard at the same time; otherwise, this motherboard and
DIMM may be damaged.
Please make sure to disconnect power supply before adding or
removing DIMMs or the system components.
Installing a DIMM
Installing a DIMM
Installing a DIMM
Installing a DIMM
Installing a DIMM
Step 1.
Unlock a DIMM slot by pressing the retaining clips outward.
Step 2.
Align a DIMM on the slot such that the notch on the DIMM matches the break
on the slot.
The DIMM only fits in one correct orientation. It will cause permanent
damage to the motherboard and the DIMM if you force the DIMM into
the slot at incorrect orientation.
Step 3.
Firmly insert the DIMM into the slot until the retaining clips at both ends fully
snap back in place and the DIMM is properly seated.
notch
break
notch
break
