ASROCK 4CORE1333-GLAN-M - V1.0, User Manual

Page: 30 / 42

3 0 3 0
3 0 3 0
3 0
3.3.2 3.3.2 3.3.2 3.3.2 3.3.2 Chipset Configuration Chipset Configuration Chipset Configuration Chipset Configuration Chipset Configuration
Memory Remap Feature
Use this item to enable or disable memory remap feature. Configuration
options: [Enabled] and [Disabled]. The default value is [Disabled].
DRAM Frequency
If [Auto] is selected, the motherboard will detect the memory module(s)
inserted and assigns appropriate frequency automatically. You may also
select other value as operating frequency: [333MHz (DDRII667)], [400MHz
(DDRII800)].
Flexibility Option
The default value of this option is [Disabled]. It will allow better tolerance for
memory compatibility when it is set to [Enabled].
DRAM CAS# Latency
Use this item to adjust the means of memory accessing. Configuration
options are [6], [5], [4], [3] and [Auto].
DRAM RAS# to CAS# Delay
This controls the latency between the DRAM active command and the
read / write command. Configuration options: [Auto], [3 DRAM Clocks], [4
DRAM Clocks], [5 DRAM Clocks] and [6 DRAM Clocks].
BIOS SETUP UTILITY
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
Chipset Configuration
Memory Remap Feature
DRAM Frequency
Flexibility Option
DRAM CAS# Latency
DRAM RAS# to CAS# Delay
DRAM RAS# Precharge
DRAM RAS# Activate to Precha
Primary Graphics Adapter
OnBoard HD Audio
Front Panel
OnBoard Lan
DRAM Voltage
Internal Graphics Mode Select
DVMT Mode Select
DVMT/FIXED Memory
[Auto]
[Disabled]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Enabled]
[PCI]
[Auto]
[DVMT Mode]
[256MB]
[Disabled]
Select Screen
Select Item
+ - Change Option
F1 General Help
F10 Save and Exit
ESC Exit
F9 Load Defaults
ENABLE: Allow
remapping of
overlapped PCI memory
above the total
physical memory.
DISABLE: Do not allow
remapping of memory.
Advanced
Please note that enabling this function may reduce CPU voltage and lead to system
stability or compatibility issue with some power supplies. Please set this item to
[Disable] if above issue occurs.
savings. The default value is [Auto]. Configuration options: [Auto], [Enabled]
and [Disabled]. If you install Windows
®
XP and select [Auto], you need to set
the “Power Schemes” as “Portable/Laptop” to enable this function. If you
install Windows
®
Vista
TM
and want to enable this function, please set this item
to [Enabled]. This item will be hidden if the current CPU does not support Intel
(R) SpeedStep(tm) tech..