9
99
99
ASRock 2Core1333-2.66G Motherboard
2.
2.
2.
2.
2. Installation
Installation
Installation
Installation
Installation
775-Pin Socket Overview
EnglishEnglishEnglishEnglishEnglish
ASRock CPU Sticker
2.1 CPU Installation
2.1 CPU Installation
2.1 CPU Installation
2.1 CPU Installation
2.1 CPU Installation
This motherboard is bundled with one
selected Dual Core CPU operating at
FSB1333 / 2.66GHz. Please do not remove
ASRock CPU stickers on both sides of CPU
socket on this motherboard.
If the stick-
ers are damaged, removed or bear the
word “VOID”, ASRock is not respon-
sible for the after service of this CPU.
In the future, you may adopt other
compatible Intel 775-LAND CPU on this
motherboard. For the installation of Intel 775-
LAND CPU, please follow the steps below.
ASRock reminds you that as long as you adopt
other CPU on this motherboard, we will not be
responsible for the after service of the bundled
CPU.
Pre-installation Precautions
Pre-installation Precautions
Pre-installation Precautions
Pre-installation Precautions
Pre-installation Precautions
Take note of the following precautions before you install mother-
board components or change any motherboard settings.
1.
Unplug the power cord from the wall socket before touching any
component. Failure to do so may cause severe damage to the
motherboard, peripherals, and/or components.
2.
To avoid damaging the motherboard components due to static
electricity, NEVER place your motherboard directly on the carpet
or the like. Also remember to use a grounded wrist strap or touch
a safety grounded object before you handle components.
3.
Hold components by the edges and do not touch the ICs.
4.
Whenever you uninstall any component, place it on a grounded
antstatic pad or in the bag that comes with the component.
5.
When placing screws into the screw holes to secure the
motherboard to the chassis, please do not over-tighten the
screws! Doing so may damage the motherboard.
Before you insert the 775-LAND CPU into the socket, please check if
the CPU surface is unclean or if there is any bent pin on the socket.
Do not force to insert the CPU into the socket if above situation is
found. Otherwise, the CPU will be seriously damaged.
