manualshive.com logo in svg

ASROCK Rack X570D4U, User Manual

Share
Download
ASROCK Rack X570D4U User Manual Download Page 86

80

81

English

Chapter  4  Software Support

After all the hardware has been installed, we suggest you go to our official website at 
http://www.ASRockRack.com and make sure if there are any new updates of the BIOS / 
BMC firmware for your motherboard.

4.1  Download and Install Operating System  

This motherboard supports various Microsoft® Windows® Server / Linux compliant 
operating systems. Please download the operating system from your OS manufacturer. 
Please refer to your OS documentation for more instructions.

*Please download the Intel® SATA Floppy Image driver from the ASRock Rack’s website (www.asrockrack.com) 
to your USB drive while installing OS in SATA RAID mode.

4.2  Download and Install Software Drivers

This motherboard supports various Microsoft® Windows® compliant drivers. Please 
download the required drivers from our website at http://www.ASRockRack.com. 

To download necessary drivers, go the product page, click on the "Download" tab, choose 
the operating system you use, and select the driver you need to be downloaded. 

4.3  Contact Information

If you need to contact ASRock Rack or want to know more about ASRock Rack, welcome 
to visit ASRock Rack’s website at http://www.ASRockRack.com; or you may contact your 
dealer for further information.

Summary of Contents for X570D4U



























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands