OCP-C612HM
20
21
English
2.6 Expansion Slot (PCI Express Slot)
There is 1 PCI Express slot on this motherboard.
PCIE slot:
PCIE1 (PCIE 3.0 x24 slot, from CPU1) is used for PCI Express x24 lane width cards (sup-
ports ASRock Rack OCP-RB only).
*Only support low profile PCIE cards
Slot
Generation
Mechanical
Electrical
Source
PCIE 1
3.0
x24
x24
CPU1
Installing an expansion card
Step 1.
Before installing an expansion card, please make sure that the power
supply is switched off or the power cord is unplugged. Please read the
documentation of the expansion card and make necessary hardware
settings for the card before you start the installation.
Step 2.
Remove the system unit cover (if your motherboard is already installed
in a chassis).
Step 3.
Remove the bracket facing the slot that you intend to use. Keep the
screws for later use.
Step 4.
Align the card connector with the slot and press firmly until the card is
completely seated on the slot.
Step 5.
Fasten the card to the chassis with screws.
Step 6. Replace the system cover.
