comfimotion.com.au
2
1
PLEASE READ THE CRITICAL INFORMATION BELOW:
•
Ensure the user, carer and/or equipment is positioned to avoid being trapped
or crushed during bed adjustment.
•
Ensure the handset cord is not stretched excessively.
•
Ensure the handset and electrical leads cannot become entangled with moving
parts of the bed.
• DISCONNECT
the power lead from the mains and stow before transporting the bed.
•
If the power lead shows any sign of damage, replace immediately.
UNDERSTANDING THE RELEVANT HANDSET
ComfiMotion Beds are powered by five-to-six electric actuators, which are controlled by the Handset.
Adjustment occurs only while a button is pressed. Adjustment will stop when the button is released,
or the selection reaches the end of its range.
6.1 SETTING UP YOUR HANDSET(S)
NOTE:
Handset cable is attached to control box out of factory; this guide is to assist if it becomes
knocked or removed during assembly or if a replacement is needed.
1. Disconnect power to the bed by unplugging from wall socket
2. Disconnect the battery backup from the bed by disconnecting the below plug from the control box
3. Wait 10 seconds for all power to deplete from the control box
4. Disconnect the existing handset(s) from the control box (if replacing) and attach your handset(s)
to the ports shown overleaf
NOTE:
only connect handsets in the configurations shown overleaf to avoid electronic system malfunction
5. Route the handset cable(s) carefully to the side of the bed that best suits the user/usage environment
6. Reconnect the battery backup
7. Reconnect power plug to wall socket
8. Wait 10 seconds
9. Conduct the Electronic System Reset procedure (see function 13 in section 6.2 Handset Operation)
to ensure software is calibrated to the new handset
6. SETTING UP AND OPERATING THE HANDSET
WARNING
LONG SINGLE AND KING SINGLE BEDS
EITHER
STANDARD HANDSET
GSP640220
SIMPLIFIED HANDSET
(SOLD SEPARATELY)
BEA830214
LONG DOUBLE AND LONG QUEEN BEDS
Handset 1
Handset 2
STANDARD HANDSET
GSP640220
PARTNER HANDSET
BEA830213
SIMPLIFIED HANDSET
(SOLD SEPARATELY)
BEA830214
STANDARD
x1
x1
OPTION 1
x1
x1
OPTION 2
x1
x1
OPTION 3
x2
