Back
ECOCOMFORT 2.0 SMART
ECOCOMFORT 2.0 SMART
49
4.3.3.2. Perceived temperature
The perceived temperature can be set in place of the measured temperature in this section.
To obtain the
perceived temperature
, the measured room temperature,
is also affected by the measured relative humidity
.
When the perceived temperature is active, the value is coloured yellow (
A) on the home page
1. Touch to activate the perceived temperature.
Now the system will display the perceived temperature
2. Touch to disable it if necessary
4.3.3.3.Filter management
1. Touch to enable the function
2. Touch to continue
3. After enabling the function, the system will display a warning when the filters need to be cleaned ( )
Note
: this function cannot be used in BLE mode.
1
3
2
1
2
A
