manualshive.com logo in svg

Aspira ECOCOMFORT 2.0 SMART Series, Use And Installation Manual

Share
Download
Aspira ECOCOMFORT 2.0 SMART Series Use And Installation Manual Download Page 47

Back

ECOCOMFORT 2.0  SMART

ECOCOMFORT 2.0  SMART

47

3.  Select the master device you want to manage on the desired user, the slave units will take its configuration
4.  Set the range of action (Perimeter area for device management)
5.  Set the speed of the device in the 3 conditions: 

within the range of action (Speed that will be set from about 150m from home exit up to the distance set under Range of action); 

when exiting the range of action (Speed that will be set after exiting the range of action); 

upon re-entering the range of action (Speed that will be set when re-entering the range of action and kept until returning home 

where it will return to the previously set mode).

6.  Touch to save
7.  Touch to find the home position
8.  Touch to confirm if you are at home

9.  Touch to enable the function according to the newly set parameters.

Note

: carry out this action near the device to be used. You will also be asked to confirm the position

Note

: Activation/deactivation and the speeds of the device will be notified with messages

9

8

4

5

6

3

7

Summary of Contents for ECOCOMFORT 2.0 SMART Series

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands