ASPERA F46, User Manual, Page: 32 / 37

-32-
previously specified.
Call barring:
The call barring function enables you to bar calls as needed. When setting this function, you
need to use a network barring code, which can be obtained from the network operator. If the code is wrong,
an error message will be prompted on the screen. After selecting a call barring option, continue to select
Activate or Deactivate. The mobile phone will prompt you to input the call barring code and then contact the
network. A moment later, the network will make a response and send the operation results to the mobile
phone.
❖
Advanced settings
Blacklist: Blacklist is used to block certain numbers from calling your phone. Note: blacklisted numbers will
still be able to message you. To add a person onto your blacklist. Go to phonebook and select a contact. Press
the left soft key to bri
ng up options. Select “Add to black list.”
Others - Auto redial : Set it to On or Off to enable or disable auto redial. If you set Auto redial to On , the
mobile phone will automatically re-dial the number a moment later if the called party does not reply. The
number of auto redial times can be set to a maximum of 10. In the auto re-dial period, you cannot dial other
numbers. To end the auto-re-dial process, press the
End key.
Note : This function requires support from the network operator to which the SIM card is registered.
Phone Settings
–
go to Settings
–
Phone settings
❖
Time and date
: set the date format, and the time format.
Note: If you remove the battery from the mobile phone or if the battery energy was exhausted a long time ago,
you may need to reset the date and time when re-inserting the battery or powering on the mobile phone after