Warwick
High Sleeper
Code: 2807 - 2806
IMPORTANT-READ CAREFULLY-RETAIN FOR FUTURE REFERENCE
11. Storage Drawer Assembly Continued.
You need:
8x Screws, 4x Castors and a Screwdriver
Carefully fit the Base by sliding it downwards into the grooves on the inside faces of the sides,
also making sure that it is fully engaged into the groove in the back of the Drawer Front. Once
the Base is correctly in position, fit the back onto the assembly by locating the exposed heads
of the fitted Dowels and Cam Pins into the holes in the sides and Brace. Once the parts are
aligned and engaged correctly, tighten each Cam to secure the back (don't forget the Cam in
the Brace).
11
Carefully flip the assembly over and fit the 4x Castors to the bottom of the Drawer as shown
using 2x Screws for each castor as shown.
Please now recheck that all fittings are properly tightened and finally place each
in your required position under the Day Bed.
