Barcode Zapper
17
Miscellaneous Options
The final section of this manual contains the setup barcodes for a number of
the more common options, such as setting the baud rate, the beeper and
trigger modes, the termination character, and ISBN (SCIS) mode.
Remember that you shouldn’t need to scan these setup barcodes – your
Barcode Zapper
will normally have been supplied already set up for you.
RS-232 Baud Rate Setup
To set the baud rate, scan the
PROGRAM
barcode on the left below, then the
SET BAUD RATE
barcode, then one of the baud rate barcodes on the right,
then the
END
barcode on the left.
1
PROGRAM
2
SET BAUD RATE
4
END
3
38400 baud
3
19200 baud
3
9600 baud
3
4800 baud
3
2400 baud
3
1200 baud
3
600 baud
