33
5.3.4 Wireless
When using the wireless network for the first time, users must conduct the following setup:
1. The camera remains wired to a network switch/router through an Ethernet cable.
2. Click on “Enable Wireless” and the Wireless settings will be ready from being set.
3. Once the setup is completed, click on Save and unplug the Ethernet cable from the
camera.
Wireless Setting
When you click on
[Search]
button, the network camera will detect the Access Points
available in the current network.
Enable Wireless
The wireless function is disabled by default; enable the wireless mode in case a
wireless connection is desired rather than the wired connection.
In order to avoid network conflicts, it is recommended that the wireless IP address be
different from the wired connection.
