53
Connects to ADSL with Floating Public IP Address (PPPoE)
If the camera connects to Internet with an ADSL modem and the public IP address of
ADSL is variable, the camera can use PPPoE function for the connection.
Connect the camera to the ADSL modem.
Refer to
page to configure the PPPoE settings.
The camera will automatic dial-up and get the public IP address from ISP.
If you have enable “Send Mail After Dialed” function, the camera will send an email
to tell you the current public IP address.
For example, if the public IP address is “60.220.20.250”, now the camera can be linked
with following addresses:
Client
Link Address
Remark
PC
http://60.220.20.250
3G Mobile
Phone
With audio:
rtsp://60.220.20.250/3g
Without audio:
rtsp://60.220.20.250/3gx
Must enable “3GPP Stream” in
Using DDNS Function
Since the public IP address is variable, you can enable DDNS function to get a fixed
URL to instead of the IP address, refer to
configure and enable the DDNS function.
ADSL
Camera
Configure the PPPoE Setting
Internet (WAN)
PC
3G Mobile Phone
