5
3. Product Installation
A. Hardware Installation
Cable Connections
Power Jack:
To connect the included power adapter.
Digital I/O:
Digital In and Relay Out.
Video Output:
The BNC connector allows connect to the analog display to
output analog video for locally monitoring.
Audio Input (
Red
):
The RCA connector allows connect to a microphone or audio
source, the connected audio will be heard at the remote site.
Audio Output (Green):
The RCA connector allows connect to an amplified speaker,
you can hear the voice of the remote site from the speaker.
Network Connector:
The RJ-45 connector allows connect the Ethernet cable.
SD Card Slot (inside of
the camera):
Insert a SD card if you want to do the event recording (video
only) in the camera.
1. Connect the cable of Digital I/O, Video output, Audio output and Audio input if you want
Power Jack (DC 12V)
Digital I/O
Analog Video Output
(Red) Audio Input
(Green) Audio Output
Network Connector
Summary of Contents for CAM624M
