Simple Installation
1–1
PlugLAN 8350 Wireless SmarTAP Installation and User’s Guide
1
Simple Installation
Congratulations on your purchase of the PlugLAN 8350 Wireless
SmarTAP.
One of the major hassles in setting up a network is installing,
pulling, or rerouting Ethernet cables. Your PlugLAN 8350 Wireless
SmarTAP is a plug-and-play solution that uses HomePlug Powerline
technology to create a wireless hotspot simply by plugging it into a
PlugLAN-enabled power outlet. Data can be delivered quickly and
securely at speeds up to 85 Mbps.
The PlugLAN 8350 Wireless SmarTAP combines robust performance
with advanced security and network management functionalities.
Built-in data encryption and VLAN capabilities ensure security and
privacy to every client. Each device can be controlled either
independently or by using Asoka's PowerView™ management
software.
These intelligent powerline bridging devices are fully plug-and-
play, giving the PlugLAN 8350 Wireless SmarTAP the perfect
combination of functionality and convenience
Your PlugLAN 8350 Wireless SmarTAP has four light-emitting diode
(LED) indicators and one RJ-45 Ethernet port.
• The LEDs show the connection status as well as other
information, allowing you to identify network problems.
• The RJ-45 Ethernet port can be used to connect your PlugLAN
8350 Wireless SmarTAP to a device in your network.
Please take a few minutes to read this chapter to install your
PlugLAN 8350 Wireless SmarTAP.